Skip to content

Water Quality Report

Wilmington, IL

Will County · 6,568 residents · 2 water systems

13

Contaminants detected

4

PFAS compounds

170

Hardness (mg/L)

0

Above legal limits

2

Above health guidelines

Wilmington drinking water comes from surface water. Based on the most recent monitoring data, 13 contaminants have been detected in the water supply, including Lead, Nitrate, Copper, Total Trihalomethanes, and 9 others. PFAS compounds have been detected at trace levels in Wilmington water. Water hardness is 170 mg/L (hard), which is within a typical range for the region.

Contaminants detected in Wilmington water

Detection does not necessarily mean unsafe levels. See individual reports for concentrations and EPA limits.

Lead0.005 / 0.015 mg/L
33% of EPA limit
Nitrate1.4 / 10 mg/L
14% of EPA limit
Copper82.9 / 1300 ug/L
6% of EPA limit
81% of EPA limit
62% of EPA limit
Atrazine1.4 / 3 ug/L
46% of EPA limit
Tritium3582 pCi/L
UnregulatedRadionuclide
Barium0.0081 / 2 mg/L
0% of EPA limit
Fluoride0.557 / 4 mg/L
14% of EPA limit
Toc6.5 mg/L
Unregulated
Pfpea0.0045 ug/L
Unregulated
PFBA (Perfluorobutanoic Acid)0.0057 ug/L
UnregulatedPFAS
Pfhxa0.004 ug/L
Unregulated
PFAS (4 compounds detected)
Microplastics (not routinely tested)

Other cities in Will County

Water quality reports for nearby Illinois communities.

Frequently asked questions

Is Wilmington, IL tap water safe to drink?
Wilmington tap water meets EPA legal standards (Maximum Contaminant Levels). However, 2 contaminants are present above independent health guidelines, which are often stricter than legal limits. 13 contaminants have been detected in the water supply, including Lead, Nitrate, Copper, Total Trihalomethanes, Haloacetic Acids (HAA5). View the detailed report for each water system to see specific levels and how they compare to both legal limits and health guidelines.
What contaminants are in Wilmington water?
Monitoring has detected 13 contaminants in Wilmington's water supply: Lead, Nitrate, Copper, Total Trihalomethanes, Haloacetic Acids (HAA5), Atrazine, Tritium, Barium, Fluoride, Toc, Pfpea, PFBA (Perfluorobutanoic Acid), Pfhxa. Additionally, 4 PFAS compounds have been detected at trace levels. 2 exceed health guidelines. See individual system reports for concentrations relative to EPA limits.
Does Wilmington water have PFAS?
Yes. 4 PFAS compounds have been detected in Wilmington's water supply at trace levels. PFAS are sometimes called "forever chemicals" because they do not break down in the environment. The EPA has set Maximum Contaminant Levels for several PFAS compounds. View the detailed report for specific concentrations.
Is Wilmington water hard?
Yes. Wilmington water has a hardness of 170 mg/L (hard). Hard water is not a health concern but can cause scale buildup in water heaters and appliances, reduce soap effectiveness, and leave mineral deposits. Water softeners or conditioning systems can address hardness.
Where does Wilmington get its drinking water?
Wilmington's drinking water comes from surface water sources. The water is treated and tested according to Illinois EPA and EPA requirements before distribution. Wilmington is served by 2 water systems, the largest being WILMINGTON (serving 5,700 people).

Check your water quality

Enter your address for a detailed report specific to your water system.

On a private well? Search your address for nearby groundwater monitoring data.

Free water assessment in Wilmington.

Schedule an onsite consultation.