Skip to content

Water Quality Report

Channahon, IL

Will County · 14,010 residents · 2 water systems

13

Contaminants detected

9

PFAS compounds

251

Hardness (mg/L)

0

Above legal limits

0

Above health guidelines

Channahon drinking water comes from groundwater wells. Based on the most recent monitoring data, 13 contaminants have been detected in the water supply, including Lead, Nitrate, Radium, Total Trihalomethanes, and 9 others. PFAS compounds have been detected at trace levels in Channahon water. Water hardness is 251 mg/L (very hard), which can cause scale buildup in appliances and reduce soap effectiveness.

Contaminants detected in Channahon water

Detection does not necessarily mean unsafe levels. See individual reports for concentrations and EPA limits.

Lead0 / 0.015 mg/L
0% of EPA limit
Nitrate3.3 / 10 mg/L
33% of EPA limit
Radium2.8 / 5 pCi/L
55% of EPA limit
4% of EPA limit
PFHpA (Perfluoroheptanoic Acid)3.8 ng/L
UnregulatedPFAS
PFPeA (Perfluoropentanoic Acid)20 ng/L
UnregulatedPFAS
Barium0.0207 / 2 mg/L
1% of EPA limit
Fluoride0.98 / 4 mg/L
25% of EPA limit
Phosphorus Total6 ug/L
Unregulated
Lithium62 ug/L
Unregulated
PFBA (Perfluorobutanoic Acid)12 ng/L
UnregulatedPFAS
Pfpea0.013 ug/L
Unregulated
Pfhxa0.0086 ug/L
Unregulated
PFAS (9 compounds detected)
Microplastics (not routinely tested)

Other cities in Will County

Water quality reports for nearby Illinois communities.

Frequently asked questions

Is Channahon, IL tap water safe to drink?
Channahon tap water meets EPA legal standards (Maximum Contaminant Levels) and independent health guidelines. 13 contaminants have been detected in the water supply, including Lead, Nitrate, Radium, Total Trihalomethanes, PFHpA (Perfluoroheptanoic Acid). Detection does not necessarily mean unsafe levels. View the detailed report for each water system to see specific levels.
What contaminants are in Channahon water?
Monitoring has detected 13 contaminants in Channahon's water supply: Lead, Nitrate, Radium, Total Trihalomethanes, PFHpA (Perfluoroheptanoic Acid), PFPeA (Perfluoropentanoic Acid), Barium, Fluoride, Phosphorus Total, Lithium, PFBA (Perfluorobutanoic Acid), Pfpea, Pfhxa. Additionally, 9 PFAS compounds have been detected at trace levels. See individual system reports for concentrations relative to EPA limits.
Does Channahon water have PFAS?
Yes. 9 PFAS compounds have been detected in Channahon's water supply at trace levels. PFAS are sometimes called "forever chemicals" because they do not break down in the environment. The EPA has set Maximum Contaminant Levels for several PFAS compounds. View the detailed report for specific concentrations.
Is Channahon water hard?
Yes. Channahon water has a hardness of 251 mg/L (very hard). Hard water is not a health concern but can cause scale buildup in water heaters and appliances, reduce soap effectiveness, and leave mineral deposits. Water softeners or conditioning systems can address hardness.
Where does Channahon get its drinking water?
Channahon's drinking water comes from groundwater wells that draw from underground aquifers. The water is treated and tested according to Illinois EPA and EPA requirements before distribution. Channahon is served by 2 water systems, the largest being CHANNAHON (serving 13,380 people).

Check your water quality

Enter your address for a detailed report specific to your water system.

On a private well? Search your address for nearby groundwater monitoring data.

Free water assessment in Channahon.

Schedule an onsite consultation.