Skip to content

Water Quality Report

Pittsville, WI

Wood County · 800 residents · 1 water system

12

Contaminants detected

5

PFAS compounds

213

Hardness (mg/L)

0

Above legal limits

2

Above health guidelines

Pittsville drinking water comes from groundwater wells. Based on the most recent monitoring data, 12 contaminants have been detected in the water supply, including Lead, Nitrate, Copper, Radium, and 8 others. PFAS compounds have been detected at trace levels in Pittsville water. Water hardness is 213 mg/L (very hard), which can cause scale buildup in appliances and reduce soap effectiveness.

Contaminants detected in Pittsville water

Detection does not necessarily mean unsafe levels. See individual reports for concentrations and EPA limits.

Lead0.0021 / 0.015 mg/L
14% of EPA limit
Nitrate4.8 / 10 mg/L
48% of EPA limit
Copper334 / 1300 ug/L
26% of EPA limit
Radium1.1 / 5 pCi/L
22% of EPA limit
Uranium0.17 / 30 ug/L
1% of EPA limit
Gross Alpha Radiation0.478 / 15 pCi/L
3% of EPA limit
Total Trihalomethanes27.6 / 80 ug/L
34% of EPA limit
87% of EPA limit
Atrazine0.013 / 3 ug/L
0% of EPA limit
Fluoride0.11 / 4 mg/L
3% of EPA limit
Barium0.157 / 2 mg/L
8% of EPA limit
PFHpA (Perfluoroheptanoic Acid)0.59 ng/L
UnregulatedPFAS
PFAS (5 compounds detected)
Microplastics (not routinely tested)

Other cities in Wood County

Water quality reports for nearby Wisconsin communities.

Frequently asked questions

Is Pittsville, WI tap water safe to drink?
Pittsville tap water meets EPA legal standards (Maximum Contaminant Levels). However, 2 contaminants are present above independent health guidelines, which are often stricter than legal limits. 12 contaminants have been detected in the water supply, including Lead, Nitrate, Copper, Radium, Uranium. View the detailed report for each water system to see specific levels and how they compare to both legal limits and health guidelines.
What contaminants are in Pittsville water?
Monitoring has detected 12 contaminants in Pittsville's water supply: Lead, Nitrate, Copper, Radium, Uranium, Gross Alpha Radiation, Total Trihalomethanes, Haloacetic Acids (HAA5), Atrazine, Fluoride, Barium, PFHpA (Perfluoroheptanoic Acid). Additionally, 5 PFAS compounds have been detected at trace levels. 2 exceed health guidelines. See individual system reports for concentrations relative to EPA limits.
Does Pittsville water have PFAS?
Yes. 5 PFAS compounds have been detected in Pittsville's water supply at trace levels. PFAS are sometimes called "forever chemicals" because they do not break down in the environment. The EPA has set Maximum Contaminant Levels for several PFAS compounds. View the detailed report for specific concentrations.
Is Pittsville water hard?
Yes. Pittsville water has a hardness of 213 mg/L (very hard). Hard water is not a health concern but can cause scale buildup in water heaters and appliances, reduce soap effectiveness, and leave mineral deposits. Water softeners or conditioning systems can address hardness.
Where does Pittsville get its drinking water?
Pittsville's drinking water comes from groundwater wells that draw from underground aquifers. The water is treated and tested according to Wisconsin DNR and EPA requirements before distribution. Pittsville is served by one water system: PITTSVILLE WATERWORKS.

Check your water quality

Enter your address for a detailed report specific to your water system.

On a private well? Search your address for nearby groundwater monitoring data.