Skip to content

Water Quality Report

Pine City, MN

Pine County · 3,663 residents · 3 water systems

13

Contaminants detected

4

PFAS compounds

—

Hardness (mg/L)

1

Above legal limits

5

Above health guidelines

Pine City drinking water comes from groundwater wells. Based on the most recent monitoring data, 13 contaminants have been detected in the water supply, including Lead, Nitrate, Arsenic, Copper, and 9 others. PFAS compounds have been detected at trace levels in Pine City water.

Contaminants detected in Pine City water

Detection does not necessarily mean unsafe levels. See individual reports for concentrations and EPA limits.

Lead0 / 0.015 mg/L
0% of EPA limit
Nitrate0.025 / 10 mg/L
0% of EPA limit
Arsenic0.0005 / 0.01 mg/L
5% of EPA limit
Copper1.5 / 1.3 mg/L
118% of EPA limit
Radium2.9 / 5 pCi/L
58% of EPA limit
Uranium0.5075 / 30 ug/L
2% of EPA limit
Trichloroethylene0.05 / 5 ug/L
1% of EPA limit
Tetrachloroethylene0.1 / 5 ug/L
2% of EPA limit
Total Trihalomethanes61.5 / 80 ug/L
77% of EPA limit
42% of EPA limit
PFBA (Perfluorobutanoic Acid)11 ng/L
UnregulatedPFAS
PFHpA (Perfluoroheptanoic Acid)2.3 ng/L
UnregulatedPFAS
PFPeA (Perfluoropentanoic Acid)2.8 ng/L
UnregulatedPFAS
PFAS (4 compounds detected)
Microplastics (not routinely tested)

Other cities in Pine County

Water quality reports for nearby Minnesota communities.

Frequently asked questions

Is Pine City, MN tap water safe to drink?
Pine City tap water has 1 contaminant currently measured above EPA legal standards (Maximum Contaminant Levels), and 5 above independent health guidelines. 13 contaminants have been detected in the water supply, including Lead, Nitrate, Arsenic, Copper, Radium. View the detailed report for each water system to see specific levels, how they compare to both legal limits and health guidelines, and what actions to take.
What contaminants are in Pine City water?
Monitoring has detected 13 contaminants in Pine City's water supply: Lead, Nitrate, Arsenic, Copper, Radium, Uranium, Trichloroethylene, Tetrachloroethylene, Total Trihalomethanes, Haloacetic Acids (HAA5), PFBA (Perfluorobutanoic Acid), PFHpA (Perfluoroheptanoic Acid), PFPeA (Perfluoropentanoic Acid). Additionally, 4 PFAS compounds have been detected at trace levels. 1 of these are above EPA legal limits. 5 exceed health guidelines. See individual system reports for concentrations relative to EPA limits.
Does Pine City water have PFAS?
Yes. 4 PFAS compounds have been detected in Pine City's water supply at trace levels. PFAS are sometimes called "forever chemicals" because they do not break down in the environment. The EPA has set Maximum Contaminant Levels for several PFAS compounds. View the detailed report for specific concentrations.
Where does Pine City get its drinking water?
Pine City's drinking water comes from groundwater wells that draw from underground aquifers. The water is treated and tested according to Minnesota Department of Health and EPA requirements before distribution. Pine City is served by 3 water systems, the largest being Pine City (serving 3,458 people).

Check your water quality

Enter your address for a detailed report specific to your water system.

On a private well? Search your address for nearby groundwater monitoring data.

Free water assessment in Pine City.

Schedule an onsite consultation.