Skip to content

Water Quality Report

Neillsville, WI

Clark County · 2,426 residents · 2 water systems

12

Contaminants detected

3

PFAS compounds

101

Hardness (mg/L)

0

Above legal limits

2

Above health guidelines

Neillsville drinking water comes from groundwater wells. Based on the most recent monitoring data, 12 contaminants have been detected in the water supply, including Lead, Nitrate, Copper, Uranium, and 8 others. PFAS compounds have been detected at trace levels in Neillsville water. Water hardness is 101 mg/L (moderately hard), which is within a typical range for the region.

Contaminants detected in Neillsville water

Detection does not necessarily mean unsafe levels. See individual reports for concentrations and EPA limits.

Lead0.0011 / 0.015 mg/L
8% of EPA limit
Nitrate0.675 / 10 mg/L
7% of EPA limit
Copper90.2 / 1300 ug/L
7% of EPA limit
Uranium0.47 / 30 ug/L
2% of EPA limit
Gross Alpha Radiation0.823 / 15 pCi/L
5% of EPA limit
Total Trihalomethanes38.1 / 80 ug/L
48% of EPA limit
85% of EPA limit
Atrazine0.0072 / 3 ug/L
0% of EPA limit
Fluoride0.71 / 4 mg/L
18% of EPA limit
Styrene0.4 / 100 ug/L
0% of EPA limit
Barium0.0128 / 2 mg/L
1% of EPA limit
PFHpA (Perfluoroheptanoic Acid)0.748 ng/L
UnregulatedPFAS
PFAS (3 compounds detected)
Microplastics (not routinely tested)

Other cities in Clark County

Water quality reports for nearby Wisconsin communities.

Frequently asked questions

Is Neillsville, WI tap water safe to drink?
Neillsville tap water meets EPA legal standards (Maximum Contaminant Levels). However, 2 contaminants are present above independent health guidelines, which are often stricter than legal limits. 12 contaminants have been detected in the water supply, including Lead, Nitrate, Copper, Uranium, Gross Alpha Radiation. View the detailed report for each water system to see specific levels and how they compare to both legal limits and health guidelines.
What contaminants are in Neillsville water?
Monitoring has detected 12 contaminants in Neillsville's water supply: Lead, Nitrate, Copper, Uranium, Gross Alpha Radiation, Total Trihalomethanes, Haloacetic Acids (HAA5), Atrazine, Fluoride, Styrene, Barium, PFHpA (Perfluoroheptanoic Acid). Additionally, 3 PFAS compounds have been detected at trace levels. 2 exceed health guidelines. See individual system reports for concentrations relative to EPA limits.
Does Neillsville water have PFAS?
Yes. 3 PFAS compounds have been detected in Neillsville's water supply at trace levels. PFAS are sometimes called "forever chemicals" because they do not break down in the environment. The EPA has set Maximum Contaminant Levels for several PFAS compounds. View the detailed report for specific concentrations.
Where does Neillsville get its drinking water?
Neillsville's drinking water comes from groundwater wells that draw from underground aquifers. The water is treated and tested according to Wisconsin DNR and EPA requirements before distribution. Neillsville is served by 2 water systems, the largest being NEILLSVILLE WATERWORKS (serving 2,384 people).

Check your water quality

Enter your address for a detailed report specific to your water system.

On a private well? Search your address for nearby groundwater monitoring data.