Skip to content

Water Quality Report

Fulton, IL

Whiteside County · 3,346 residents · 1 water system

11

Contaminants detected

2

PFAS compounds

360

Hardness (mg/L)

1

Above legal limits

0

Above health guidelines

Fulton drinking water comes from groundwater wells. Based on the most recent monitoring data, 11 contaminants have been detected in the water supply, including Lead, Arsenic, Copper, Radium, and 7 others. PFAS compounds have been detected at trace levels in Fulton water. Water hardness is 360 mg/L (very hard), which can cause scale buildup in appliances and reduce soap effectiveness.

Contaminants detected in Fulton water

Detection does not necessarily mean unsafe levels. See individual reports for concentrations and EPA limits.

Lead0 / 0.015 mg/L
0% of EPA limit
Arsenic0.0118 / 0.01 mg/L
118% of EPA limit
Copper158 / 1300 ug/L
12% of EPA limit
Radium4.1 / 5 pCi/L
82% of EPA limit
Total Trihalomethanes16.2 / 80 ug/L
20% of EPA limit
8% of EPA limit
Barium0.478 / 2 mg/L
24% of EPA limit
Fluoride0.16 / 4 mg/L
4% of EPA limit
Phosphorus Total78 ug/L
Unregulated
Lithium17 ug/L
Unregulated
PFBA (Perfluorobutanoic Acid)0.0067 ug/L
UnregulatedPFAS
PFAS (2 compounds detected)
Microplastics (not routinely tested)

Other cities in Whiteside County

Water quality reports for nearby Illinois communities.

Frequently asked questions

Is Fulton, IL tap water safe to drink?
Fulton tap water has 1 contaminant currently measured above EPA legal standards (Maximum Contaminant Levels). 11 contaminants have been detected in the water supply, including Lead, Arsenic, Copper, Radium, Total Trihalomethanes. View the detailed report for each water system to see specific levels, how they compare to both legal limits and health guidelines, and what actions to take.
What contaminants are in Fulton water?
Monitoring has detected 11 contaminants in Fulton's water supply: Lead, Arsenic, Copper, Radium, Total Trihalomethanes, Haloacetic Acids (HAA5), Barium, Fluoride, Phosphorus Total, Lithium, PFBA (Perfluorobutanoic Acid). Additionally, 2 PFAS compounds have been detected at trace levels. 1 of these are above EPA legal limits. See individual system reports for concentrations relative to EPA limits.
Does Fulton water have PFAS?
Yes. 2 PFAS compounds have been detected in Fulton's water supply at trace levels. PFAS are sometimes called "forever chemicals" because they do not break down in the environment. The EPA has set Maximum Contaminant Levels for several PFAS compounds. View the detailed report for specific concentrations.
Is Fulton water hard?
Yes. Fulton water has a hardness of 360 mg/L (very hard). Hard water is not a health concern but can cause scale buildup in water heaters and appliances, reduce soap effectiveness, and leave mineral deposits. Water softeners or conditioning systems can address hardness.
Where does Fulton get its drinking water?
Fulton's drinking water comes from groundwater wells that draw from underground aquifers. The water is treated and tested according to Illinois EPA and EPA requirements before distribution. Fulton is served by one water system: FULTON.

Check your water quality

Enter your address for a detailed report specific to your water system.

On a private well? Search your address for nearby groundwater monitoring data.

Free water assessment in Fulton.

Schedule an onsite consultation.