Skip to content

Water Quality Report

Silver Lake, WI

148 residents · 2 water systems

14

Contaminants detected

2

PFAS compounds

470

Hardness (mg/L)

0

Above legal limits

3

Above health guidelines

Silver Lake drinking water comes from groundwater wells. Based on the most recent monitoring data, 14 contaminants have been detected in the water supply, including Lead, Nitrate, Arsenic, Copper, and 10 others. PFAS compounds have been detected at trace levels in Silver Lake water. Water hardness is 470 mg/L (very hard), which can cause scale buildup in appliances and reduce soap effectiveness.

Contaminants detected in Silver Lake water

Detection does not necessarily mean unsafe levels. See individual reports for concentrations and EPA limits.

Lead0.0012 / 0.015 mg/L
8% of EPA limit
Nitrate0.23 / 10 mg/L
2% of EPA limit
Arsenic0.0011 / 0.01 mg/L
11% of EPA limit
Copper100 / 1300 ug/L
8% of EPA limit
Radon107 pCi/L
UnregulatedRadionuclide
Radium1.1 / 5 pCi/L
22% of EPA limit
Uranium0.093 / 30 ug/L
0% of EPA limit
Gross Alpha Radiation0.8085 / 15 pCi/L
5% of EPA limit
Nickel0.0032 mg/L
UnregulatedInorganic
Cadmium0.00027 / 0.005 mg/L
5% of EPA limit
Chromium (total)0.0028 / 0.1 mg/L
3% of EPA limit
Mercury (inorganic)0.000021 / 0.002 mg/L
1% of EPA limit
Barium0.15 / 2 mg/L
8% of EPA limit
Fluoride0.26 / 4 mg/L
7% of EPA limit
PFAS (2 compounds detected)
Microplastics (not routinely tested)

Frequently asked questions

Is Silver Lake, WI tap water safe to drink?
Silver Lake tap water meets EPA legal standards (Maximum Contaminant Levels). However, 3 contaminants are present above independent health guidelines, which are often stricter than legal limits. 14 contaminants have been detected in the water supply, including Lead, Nitrate, Arsenic, Copper, Radon. View the detailed report for each water system to see specific levels and how they compare to both legal limits and health guidelines.
What contaminants are in Silver Lake water?
Monitoring has detected 14 contaminants in Silver Lake's water supply: Lead, Nitrate, Arsenic, Copper, Radon, Radium, Uranium, Gross Alpha Radiation, Nickel, Cadmium, Chromium (total), Mercury (inorganic), Barium, Fluoride. Additionally, 2 PFAS compounds have been detected at trace levels. 3 exceed health guidelines. See individual system reports for concentrations relative to EPA limits.
Does Silver Lake water have PFAS?
Yes. 2 PFAS compounds have been detected in Silver Lake's water supply at trace levels. PFAS are sometimes called "forever chemicals" because they do not break down in the environment. The EPA has set Maximum Contaminant Levels for several PFAS compounds. View the detailed report for specific concentrations.
Is Silver Lake water hard?
Yes. Silver Lake water has a hardness of 470 mg/L (very hard). Hard water is not a health concern but can cause scale buildup in water heaters and appliances, reduce soap effectiveness, and leave mineral deposits. Water softeners or conditioning systems can address hardness.
Where does Silver Lake get its drinking water?
Silver Lake's drinking water comes from groundwater wells that draw from underground aquifers. The water is treated and tested according to Wisconsin DNR and EPA requirements before distribution. Silver Lake is served by 2 water systems, the largest being LAKECREST SHORES LLC (serving 88 people).

Check your water quality

Enter your address for a detailed report specific to your water system.

On a private well? Search your address for nearby groundwater monitoring data.

Free water assessment in Silver Lake.

Schedule an onsite consultation.